Explore Enamels and more!

Explore related topics

Máscara para engobe por Vicente Cardia

Máscara para engobe por Vicente Cardia

Sharing my raku recipes and results. Mixed it last night, sieved and applied three brushed on coats this morning.  It applied very nicely. ~Lucky Crane Pottery

Raku, Ferguson White Crackle Sharing my raku recipes and results. Mixed it last night, sieved and applied three brushed on coats this morning.

Metallic glaze test tile, cone 6. Stephen Murfitt recipe ||  manganese dioxide 61, China clay 23, copper oxide 8, cobalt oxide 8. Firing range 1240-1260 C.

Metallic glaze test tile, cone Stephen Murfitt recipe Pam, we gotta try this!

PPP: Using Decorative Engobes

Since pottery is an endeavor that involves many steps-any of which can cause total failure-potters often misguidedly cling to a set method or technique that they think will provide a guaranteed result.

Chūn glaze (Emanuel Cooper recipe) Really for cone 8-9, but I fire 10 – 11 with this glaze.    Potash Feldspar 46  Dolomite 6  Zinc Oxide 6  Whiting 10  China Clay 2  Silica 30  Bentonite 1    This works well for me over a variety of tenmoko glazes or iron bearing slips.

Chūn glaze (Emanuel Cooper recipe) Really for cone but I fire 10 – 11 with this glaze. Potash Feldspar 46 Dolomite 6 Zinc Oxide 6 Whiting 10 China Clay 2 Silica 30 Bentonite 1 This works well for me over a variety of tenmoko glazes or iron bearing slips.

Raspberry ^6

Ceramic Arts Daily – Technofile: Demystifying Chrome Oxide for Fantastic Ceramic Glaze Color

making ash glaze

Glaze Mixing Over the summer I've been doing lots of glaze testing, and one of these has been to find my own Wood Ash Glaze recipe.

how to sieve glazes..

Lakeside pottery glaze info and underglaze chart for cone 6 firing LOts of…

Imagen relacionada

Ron's Fall Yellow - cone 6 oxidation (original recipe for reduction)

Understanding deflocculation is a key to successful slip casting.  (First get the specific gravity right before deflocculating.)

Understanding deflocculation is a key to successful slip casting. (First get the specific gravity right before deflocculating.

When to use Magic Water?  It's used when the bond between two pieces of clay is a suspect for cracking during drying or bisque firing. Cracks can occur in the following conditions: When one piece of clay dries faster than the other which typically occurs when it has a smaller mass or thinner than the other piece (e.g., a mug handle).  When one clay piece is applied to another piece that is already a dryer leather-hard.

Magic water solution: How to make Magic Water - Recipe? 1 gallon of water 3 table spoons of liquid sodium silicate (where to buy) 1 teaspoons of soda ash (where to buy) Magic water solution Soda ash powder form sodium silicate

Pinterest
Search