Dayton audio

In this blog post, I’ll explain the Dayton Audio HTA100 Tube Upgrade. This article gives an easy and complete guide to tube upgrades so you can be sure to get

This edition of Test Bench characterizes Dayton Audio’s new 6” diameter ultra-low-profile midwoofer, the LW150-4. This is a new ultrathin profile cone 6” diameter midbass driver featuring a six-spoke cast-aluminum frame with a 1.5” total depth. The depth reduction is significant as the motor assembly is housed inside the frame and uses a neodymium slug and a 1.5” diameter return cup that incorporates a T-pole. This article was originally published in Voice Coil, March 2016.

The venerable Lepai LP-2020A+ amplifier paired with the new Dayton Audio B452 bookshelf speakers are a winning combination, says the Audiophiliac.

Designer: RafaHiFi Project Category: Loudspeakers/Cabinets Project Level: Beginner Project Time: 20+ Hours Project Cost: $100 – $500 Project Description: Two way full range speakers. Suitable…

My DIY speaker feature dayton audio parts. The look I was going for was a blend of vintage and modern. The wood face is 1/2 purpleheart and the body is 1/2 MDF.Drivers are DA rs100-4 4" reference full range driver 4ohm powered by a DA kab-250v3 amplifier board.

4″ Woofer, 94 Hz, 60 W, 85 dB, 8 Ω

Need a small, bluetooth amp for you portable speaker build? Skim through this Dayton Audio KAB-250v3 review and see if it's for you.